![]() |
Where is Unfused Positive Terminal on a W140 under hood???
Since the battery is in the trunk, I'm trying to locate an Unfused Positive Terminal which runs directly from the battery.
I want to hook up a Xenon Kit, which has its own 10A fuse. The current Low/High Beam lights run off a 7.5A fuse. So tapping into them, would be problematic as it would cause the fuse to constantly burn out. I could tap into the current Low/High Beam positive feed in the headlight assembly and then change the fuse in the fuse box into a 10A, but I don't want to mess with that. Who knows what else it might effect! I rather just connect directly to the battery. Thanks. |
on the starter solenoid - it's constant 12v+, straight back to the battery.
|
All times are GMT -4. The time now is 07:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website