Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-22-2007, 02:15 PM
Benz300's Avatar
Benz Enthusiast
 
Join Date: Sep 2003
Location: new jersey, usa
Posts: 804
pse unit requires programming?

I have to change the PSE pump on the 00 E430. The dealer is asking for $190 just for initial diagnostics and then labor / parts extra comes later !
I already know it's the PSE pump. I have taken it apart as well. Not an issue. Just wanted to know if the new part will be a simply plug and play or would any other modules or the PSE itself require programming to work the the car.
thnx in advance.

__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.
Reply With Quote
  #2  
Old 05-22-2007, 02:22 PM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
according to the mercedes parts guide, it does require programming during installation. footnote 423

just insist they replace the pump, without diag, obviously you are taking it knowing by your own diag it is the pump

210-800-27-48
__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins
Reply With Quote
  #3  
Old 05-22-2007, 04:01 PM
Benz300's Avatar
Benz Enthusiast
 
Join Date: Sep 2003
Location: new jersey, usa
Posts: 804
good idea. i'll call and check if the dealership will change without charging diagnostics. somehow i dont see that happening.
how much is involved in programming the unit ? do we need to have the mercedes software for it ?
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.
Reply With Quote
  #4  
Old 05-22-2007, 04:14 PM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
programming needs to be done with a mercedes factory tool, is there an independent mercedes shop near you? many have the tool and can do the programming, i have it if you are near san diego
__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins
Reply With Quote
  #5  
Old 05-22-2007, 04:30 PM
Benz300's Avatar
Benz Enthusiast
 
Join Date: Sep 2003
Location: new jersey, usa
Posts: 804
thanks very much for the replies and once again for the offer. i'm however, in NJ so
will keep you posted on how it went once I get the time to go and get this done.
the PSE is operational to the point where the doors do lock, it's only the stupid trunk that wont unlock either with the key remote or the inside button ever since the PSE was soaked with water.
I tried drying it, de-oxidizing it and everything. for now i'll simply lock/unlock the trunk with the key

P.S. is there a way to have a regular key made for the w210 series ? there's this small key blade in the key but I'd rather have the regular key for the frequent opening of the trunk now...
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.
Reply With Quote
  #6  
Old 05-22-2007, 04:56 PM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
does your main key not have the metal blade?

the "emergency" key blade is available mb# 208-766-17-06

__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page