Temp sensor question
1 Attachment(s)
Can anyone tell me where this three pin temp sensor is located on my 92 300E? I've replaced 3 sensors on top of the cylinder head (a one pin, a two pin and a 4 pin) and it's not one of them. It's listed as an Engine Temperature Sensor; 105/115 Degree C.
Thanks for any help. |
That sensor has been replaced on your chassis to the 2 wire/blue sensor...the 3 pin is for the earlier systems.
The 3 pin was a binary on/off style sw and controlled aux fan at 105C and comp cut-out at 115C The blue replacement is a thermistor style [ neg. coef.] and sends a temp dependant variable resistance value to the ACC panel, which then switches the same components , but at 105C. aux. high fan activation and 130C. comp cut-out. |
Thanks.
|
You are welcome
|
All times are GMT -4. The time now is 09:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website