![]() |
|
|
|
|
#1
|
|||
|
|||
400E DTC on Base Module
I'm getting DTCs 5 and 6 on my base module (socket 8 of the 38 pin connector).
DTC 5 says that the maximum allowable temperature in the module box has been exceeded (F23). I think my year model had a cooling fan on the box. I'll check out the fan to see if it's still working, although, I understand that later years had the fan deactivated anyway. Code 6 indicates the a/c electronic clutch is jammed or the poly v-belt is broken. The a/c works fine and the poly v-belt has not broken. Any ideas on this one? Could the two codes be related to one problem?
__________________
1993 400E, 256,000 miles (totaled) 1994 E420, 200,000+ miles 1995 E420, 201,000 miles |
Bookmarks |
|
|