Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-23-2007, 09:05 PM
Registered User
 
Join Date: Aug 2001
Location: Houston, Texas
Posts: 393
The 1300 ohms is under what condition ? Cold or 80 degC ? The resistance should be high when cold and almost a factor of 10 lower when at 80 degC. Otherwise replace the coolant temp sensor, this tells the fuel computer what air/fuel ratio needs to be set and also the EZL what timing to use. No your EZL does not need replacement.
__________________
Saumil S. Patel
Reply With Quote
  #2  
Old 08-23-2007, 10:32 PM
Registered User
 
Join Date: Jul 2007
Location: USA
Posts: 2,156
It is when the car isnt runninng or when its cold. havent gotten a read when its 80 c since the car usually stalls pretty quickly right after starting it. to keep the car running I need to hold gas pedal down. What causes a rich mixture? Does the cold start valve play in the picture?
I dont have any of the special tools including mercedes diagnostis tools or lambda and Im bascially shotgunning the cheap parts. THe parts that cost like 300 and up Im not shotgunning.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page