![]() |
BAS/ESP ECU car starting issue / conv top problem
2000 CLK 430 cabrio -
Car won't start w BAS/ESP ECU plugged in. Car was in shop for bodywork, brake booster removed along w both ECUs. Car starts after mechanic removed this green wire from the BAS/ESP ECU. Replaced tail lamp switch, brake lights don't illuminate and car won't start w BAS/ESP ECU plugged in still. Could this be a problem w the brake booster and the connections below master cylinder?? Conv top work actuate. Trunk lock looks like it has been monkeyed w before. Replaced damaged vacuum pump. Locks all work. Conv hydraulic pump won't turn on. Is there a way to check if trunk lock is bad?? Issues I should check for top operation? Fluid level is full thanks!! Jim |
All times are GMT -4. The time now is 06:46 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website