Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-05-2007, 03:23 PM
Registered User
 
Join Date: Oct 2001
Posts: 226
Coolant Hose Life

What's the recommended time to replace coolant hoses? My car is over 10 years old and they've never been changed. The all "look" good on the outside. I have had one recent issue in which I had the headgasket changed and the indy replaced the coolant and I've had a leak from the where the hose attaches to the water pump. I've tightened the clamp and hopefully that will eliminate the leak. Seems as if the removing and reattaching has stretched the opening ("mouth?") of the hose a little. Is there some sealant that is used when attaching hoses? Wondering if they should have all been changed when the headgasket was done. All the hoses combined come to less than $50. Labor should have been minimal since everything was apart and drained. Opportunity missed?
Reply With Quote
  #2  
Old 12-05-2007, 03:26 PM
Dee8go's Avatar
Senor User
 
Join Date: Apr 2006
Location: The People's Republic of Arlington, VA
Posts: 7,197
Usually, if hoses are going bad, they'll show cracks if you squeeze them with your hand.
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century

OBK #55

1998 Lincoln Continental - Sold
Max 1984 300TD 285,000 miles - Sold
The Dee8gonator 1987 560SEC 196,000 miles - Sold
Orgasmatron - 2006 CLS500 90,000 miles
2002 C320 Wagon 122,000 miles
2016 AMG GTS 12,000 miles
Reply With Quote
  #3  
Old 12-05-2007, 04:22 PM
Registered User
 
Join Date: May 1999
Location: Sacramento, CA
Posts: 1,565
No sealant when attaching hoses, just a hose clamp. Check that the clamps are tight and look for cracks. It would've been easier to replace the hoses when the block was drained and the head off, it's still not too difficult, but they have to redrain and refill the coolant.

Hoses tend to last about 10 years or so, give or take.
Reply With Quote
  #4  
Old 12-05-2007, 07:29 PM
Registered User
 
Join Date: Dec 2006
Location: Colombia
Posts: 194
Oil

Hi,

I've been there. If you replaced the head gasket, it was because you probably got coolant mixed with oil. If oil got in the cooling system, you do need to replace all hoses. They will start to fail one after another. Oil eats hoses' rubber.

It's easy and cheap.

Regards,

Juan
__________________
-----------------
Juan
1995 E320 Sedan
2008 Ford Escape
RC Helicopter
Reply With Quote
  #5  
Old 12-05-2007, 07:37 PM
Hatterasguy's Avatar
Zero
 
Join Date: Nov 2002
Location: Milford, CT
Posts: 19,318
Modern OE cooling hoses should be good for at least 10-12 years. Mercedes uses really good hoses so I have seen some that are still good after 20, 25, even 30 years.

But if it were my car after 10-12 years I'd change at least the upper thats whats goingto blow first. Around 15 I re hose the whole engine bay.

I'm slowly doing the SDL because most of the heater hoses in back are $80-$100 so I do one a year. Only 2 left.
__________________
2016 Corvette Stingray 2LT
1969 280SE
2023 Ram 1500
2007 Tiara 3200
Reply With Quote
  #6  
Old 12-05-2007, 08:51 PM
Pete Geither's Avatar
Half Fast Moderator
 
Join Date: Feb 2002
Location: Western Pa.
Posts: 2,417
I think mileage and time both should be considered. I have replaced all the hoses on my 95 E320,,, 133K. While the hoses on my 95 SL with 62K still seem to be like new.
__________________
95 SL500 Smoke Silver, Parchment 64K
07 E350 4matic Station Wagon White 34K
02 E320 4Matic Silver/grey 80K
05 F150 Silver 44K
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page