|
|
|
|
|
#1
01-29-2008, 12:24 AM
|
|||
|
|||
|
Ign-sw--no Start
HI I have a problem or maybe two problems--my 1985--300D--will
not start with the key--It was like this when I got the car . I can start car by jumpering terminal 1 to 3 on connection block and it will run all day like that---as long as key is in run position # 3 I tried to fix problem and I pulled --KEY--TUMBLER--AND BLACK RING--out of switch- --my first question is should key turn all the way to position #-4-- which is start position I assume??--while I am holding it in my hand or not ---Then my next question is the part of switch still in the car has two indenttations in it That appear to be turned by tumbler assembly two tits sticking out shoul I be able turn the part in car to position--1-----2-------3-- and then to position #--4--and start car also in what position is steering unlocked and how ????---also which assembly has spring in it to return key to run position after being in start position????------I noticed they is someone on this site that has sent drawings to people that are to big for this site---I think name is---RASLAJE--or something like that I would appreciate a wiring diagram of ignition switch and maybe what fuses or relays that wires go to---so I can troubleshoot problem from switch by looking at wires under hood or fuse block---any help is greatly appreciated thanks again for help this is a great site I will be able to help others once I get accustomed to this car---- 
|
| Bookmarks |
|
|
Threaded Mode
