|
|
|
|
|
#1
12-31-2011, 03:01 PM
|
|||
|
|||
|
Cooling Fan Spin Sin 560sec
My cooling fan spins freely after engine shutdown-is the fix a part replacement or can I service it?
Thx John 
|
|
#2
12-31-2011, 04:06 PM
|
|||
|
|||
|
Not necessarily a problem. The fan is hydraulic coupled to the engine through the fan clutch. When working properly the fan engagement should increase as the air temperature across it increases. Thusly when air flow across it is cool, the fan isn't needed and is only loosely coupled.
__________________
 90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff
|
|
#3
01-01-2012, 12:59 PM
|
|||
|
|||
|
Thanks!
John
|
 |
| Bookmarks |
|
|
Linear Mode
