|
|
|
|
|
#1
02-02-2008, 02:16 PM
|
|||
|
|||
|
seatbelt lights keep flashing
the seatbelt lights keep flashing on my 1993 300E. anyone have any ideas??
TIA father bob 
|
|
#2
02-02-2008, 07:40 PM
|
||||
|
||||
|
Answer:
* Broken wire
* Damaged sensor DANGER: The retractor is loaded with an EXPLOSIVE tensioner unit, this part is Dealer only, MB# 1248600586 $260.00 The Left buckle unit is MB# 1248606369 $122.00 A trained professional needs to deal with this diagnostic. Have a great day.
__________________
ASE Master Mechanic https://whunter.carrd.co/ Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 2003 Volvo V70 https://www.boldegoist.com/
|
|
#3
02-02-2008, 08:45 PM
|
||||
|
||||
|
Answer:
* Broken wire * Damaged sensor Answer??? Sounds more like a wild guess!!! I'll bet the front dome light assembly is to blame (that's where the seat belt warning light is). It works off of an internal timer. Father Bob, try disconnecting the dome light for a few minutes. Then, re-connect it and see if the problem goes away.
|
|
#4
02-02-2008, 09:07 PM
|
||||
|
||||
|
Fyi:
Quote:
 I forget at times that not everyone has this issue.  A corroded buckle, retractor or connector/wire are common here. Certainly you are correct, try the dome light first. 
|
 |
| Bookmarks |
|
|
Linear Mode
