|
|
|
|
|
#1
11-08-2002, 06:21 PM
|
|||
|
|||
|
C230K belly pan
I own a 2002 C230K and want to do a pre-FSS oil change at 4000 miles. I do not own a "topsider" yet. Which belly pan do I need to remove to access the oil drain plug? I do not want to remove any more than is necessary. How hard is it to remove the filter cartridge from the housing? I have the wrench to remove the cover. Thanks in advance.
|
|
#2
11-08-2002, 07:41 PM
|
||||
|
||||
|
I believe there is only 1 belly pan, AKA lower encapsulation panel. If there is more than one, the one under the oil pan is the front one, should have only 4 screws holding it on to the bottom of the car, easy job. The oil filter is easy to get off. Your car has the EVO motor so you need to take off the cover to the left (drivers side) of the valve cover, it's under that cover, snaps right off.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
|
|
Linear Mode
