Installing my euros in 123 ???
I seem to need some fasteners on the inside of the light assembly. The holes are f ing huge! I am reluctant to use 3/8" bolts. Anybody have the hot set up?
Tom W |
you should be able to use the clips that the us spec lights use to thread the bolt.
the katmacs I bought came with the clips oh.. wait.. on the inside? what? |
The holes are large so the housings can be adjusted up, down, and sideways. A clip mounts on the crossmember to which the lights mount. I don't remember if it is the same one used by the USA lights, but just a long sheet metal screw with a washer is what you should use - no 3/8 bolts.
|
OK. Thanks, guys.
I'll try that. Tom W |
All times are GMT -4. The time now is 08:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website