No Turn Signal Or Hazard
HI,
I have a 1987 260e (w124) I have a problem with ma turn signals and hazard. None of them seem to be working at all. Nothing comes up at all when i turn them on. I would like to know if anyone knows what the problem is and if anyone knows where the flasher is located????? thanks |
It's probably your COMBINATION relay. (How do your intermittent wipers work?) The relay is roughly $50 and can be purchased here. Also, try turning the hazard flashers on and off a few times. GOod luck!
|
Hey, my wipers work fine everything else works
perfectly fine except the turn signals and the hazards. I played with the hazard lights but nothing is happening. I dont know what to do? please help and let me kno where the flasher is located? thanks |
replace your flasher unit.
|
Hazard light switch
Where is the hazard light switch located on the dash or the console?
|
The problem can be either the flasher relay or the switch. It will be easier to debug it if you have the wiring diagram. You were saying that the intermittent wiper is working, then, your flasher relay is possibly okay.
David |
All times are GMT -4. The time now is 04:43 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website