|
|
|
|
|
#2
02-11-2007, 02:27 PM
|
|||
|
|||
|
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) 
|
|
#4
02-11-2007, 02:52 PM
|
|||
|
|||
|
Shouldn't be.
Did you close the door when you did it??? I usually have to try 2 or 3 times for it to take.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
|
#5
02-11-2007, 02:57 PM
|
|||
|
|||
|
yes,
1) doors closed 2) waited untill all indicators were off 3) tounr key to pos 2 4) push reset button twice in 4 sec 5) turn key back to pos 1 6) press and hold reset turn to pos 2 until beep (never hear it) Clueless here... I am I doing the right steps?
|
|
#6
02-11-2007, 03:24 PM
|
|||
|
|||
|
I dont ever hear a beep on mine iether.
Did you read this one.....subtle changes based upon year. Reset the FSS (Little Wrench)?
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
|
#7
02-11-2007, 04:05 PM
|
|||
|
|||
|
Sorry to be so densed.... But i must be doing something wrong because every combination i try no change....
BTW, while trying the different combinations I got a combination i hadn't seen before.... 3.2 27 13.0 Any idea what this mean? This display must be able to be used for a number of different things, any idea hoe to find out the different combinations are? Thanks
|
|
#8
02-11-2007, 04:23 PM
|
||||
|
||||
|
is it 97 or 98? the service indicator wasn't used until model year 1998
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins
|
|
#10
02-11-2007, 10:10 PM
|
||||
|
||||
|
Thats strange, my buddy has a 1997 S320 and it most certainly doesn't have FSS.
What are you trying to do? Whats the problem?
__________________
2016 Corvette Stingray 2LT 1969 280SE 2023 Ram 1500 2007 Tiara 3200
|
|
#11
02-12-2007, 07:10 AM
|
|||
|
|||
|
I am sure it is a 1997 S320 but i don't know if it has FSS. What i am trying to do is reset the "little Wrench" symbol which i believe is the service reminder indicator. In the tread some else called it an FSS.
I have tried the different combination listed in tread but unless i am doing something wrong no results.
|
|
#13
02-12-2007, 11:17 AM
|
|||
|
|||
|
My '97 S320 has no such animal. Maybe yours is late in the '97 run and has the FSS that apparently was implemented for '98's.
Steve
|
|
#15
02-13-2007, 07:31 AM
|
|||
|
|||
|
As with many problems, the key to the solution is in clearly defining the problem. This has gone from how to reset FSS, to does it have FSS, to the little wrench displayed on the instrument panel. Seems like I remember reading that all FSS cars require the fleece oil filter. '97 M104 engine does not use the fleece filter.
So, specifically, which light is this? For my '97 S320 there are 6 to the left of center and 8 to the right of center. The Check Engine light is the rightmost light on the panel. According to my owner's manual the Check Engine light displays the words, Check Engine. Mine has never lit, so I don't know what it actually would display. Steve
|
 |
| Bookmarks |
|
|
Linear Mode
