|
|
|
#1
|
|||
|
|||
Vibration when off the gas and off brake
I just did a brake swap on my 190E to the E420 calipers and rotors and noticed an interesting vibration problem with the car.
on the freeway when I was preparing to exit, I let off the gas and noticed a pretty bad vibration coming from the car (not sure where exactly its coming from). I also noticed that the vibration goes away when I apply the brakes as well. it seems independent of the drivetrain as well because when I put the car in neutral and coast, it vibrates, but once i apply the brakes, vibration goes away. any idea what is wrong? I plan to check the wheel lugs again, maybe I tightened them incorrectly. |
#2
|
||||
|
||||
Quote:
Assuming you did everything correctly, maybe the hub/spindle of the 190 is not designed to take the beefiness/weight of the 420 calipers? Just guessing. Do you know of someone else who did this? Is this why you tried it?
__________________
the sooner you start... the sooner you'll get done If it ain't broke, don't fix it.. Its always simpler to tell the truth... 2007 Honda Accord EX 2007 Honda Accord SE V6 96 C220 97 Explorer - Found Another Home 2000 Honda Accord V6 - Found Another Home 85 300D - Found Another Home 84 300D - Found Another Home 80 300TD - Found Another Home Previous cars: 96 Caravan 87 Camry 84 Cressida 82 Vanagon 80 Fiesta 78 Nova Ford Cortina Opel Kadet 68 Kombi Contessa |
#3
|
|||
|
|||
ok it was the wheel, false alarm torqued everything back down and its all good.
|
Bookmarks |
|
|