|
|
|
|
|
#1
12-13-2008, 06:11 PM
|
|||
|
|||
|
Turn Signals
89 300TE tried to use my turn signal and all I get is a humming sound coming from the dash, doesnt matter left or right, the emergency flasher works. Is there a relay and where might it be located???
Thanks
__________________
'05 Ford Escape 100,000 miles '87 560SL 92000 miles '89 300TE 199,000 miles '02 Audi TT 100,000 miles '00 Ford Excursion V-10 121000 miles '92 Mercury Capri 100000 miles '02 BMW 325XI 60000 miles '92 230CE 160000 '87 BMW 535SI 160,000 miles '93 Rinker Captiva 209 5 Kids 2 Dogs 1 Wife 
|
|
#2
12-14-2008, 09:54 PM
|
|||
|
|||
|
turn signals
somebody has to know something about the turn signals!!!!!!!!!!!!!!!!!
Thanks
__________________
'05 Ford Escape 100,000 miles '87 560SL 92000 miles '89 300TE 199,000 miles '02 Audi TT 100,000 miles '00 Ford Excursion V-10 121000 miles '92 Mercury Capri 100000 miles '02 BMW 325XI 60000 miles '92 230CE 160000 '87 BMW 535SI 160,000 miles '93 Rinker Captiva 209 5 Kids 2 Dogs 1 Wife
|
|
#3
12-15-2008, 10:43 AM
|
||||
|
||||
|
Turn Signals
This may help! I had a similar problem and it turned out to be what this post covered.
http://www.mbworld.org/forums/e-class-w124/273097-blinkers-temp-gauge-wipers.html Cost about $60 to replace!
|
|
#4
12-15-2008, 01:02 PM
|
|||
|
|||
|
turn signals
Big Dog my problem is just the turn signals, everything else works, also if I push the emergency flashers the turn signals work
__________________
'05 Ford Escape 100,000 miles '87 560SL 92000 miles '89 300TE 199,000 miles '02 Audi TT 100,000 miles '00 Ford Excursion V-10 121000 miles '92 Mercury Capri 100000 miles '02 BMW 325XI 60000 miles '92 230CE 160000 '87 BMW 535SI 160,000 miles '93 Rinker Captiva 209 5 Kids 2 Dogs 1 Wife
|
|
#5
12-15-2008, 06:01 PM
|
||||
|
||||
|
Turn Signals!
I assume you checked the obvious already? Take all the bulbs out and check them to be sure. Check the connections along with the fuse. Could still be the relay if everything else checks out OK! Doesn't sound like the combination switch (lever) but you never know!
|
|
#6
12-15-2008, 06:08 PM
|
||||
|
||||
|
Turn signals!
Oh, I forgot!
Here is a quick check to see if your combination relay is bad. Take out the relay and shake it. If you hear something rattling inside, it is bad. What happens is a soder joint or a metal piece fails and falls apart. Any rattling is a sign the entire relay needs to be replaced. There are three relays inside! If you are really handy, you can try to repair the relay yourself like the gentleman did in the original post. I thought about it but decided it wasn't worth it. It could have been an easy fix but other joints were prone to failure too!
|
 |
| Bookmarks |
|
|
Linear Mode
