|
|
|
#1
|
|||
|
|||
1995 E320 Coupe Serpentine Belt, HELP !
I have a 1995 E320 coupe and my Serpentine Belt just shredded tonight, i am going to buy anew one Monday and throw it in but i need a diagram of the pulley setup and how to thread the belt
Any DIY tutorials would be appreciated and any other advice would be helpful as well Thanks in advance |
#2
|
||||
|
||||
Diagram
Hi
You will find a diagram for for your poly-V belt in your owner's manual. Check the index under V-Belt Your owner's manual should be in the glove box Max |
#3
|
||||
|
||||
OOPS,,, no glove box in that car. Maybe in the console, or in the pockets on the front seat backs.
__________________
95 SL500 Smoke Silver, Parchment 64K 07 E350 4matic Station Wagon White 34K 02 E320 4Matic Silver/grey 80K 05 F150 Silver 44K |
#4
|
|||
|
|||
I have my manual and i know i have seen the diagram in there before but i believe i left my manual in storage . . .
Any online links to a diagram? or anyone with the same motor that can scan that diagram for me? it would REALLY be appreciated Thanks again ! |
#5
|
|||
|
|||
It's the same as the S320 on page 126 here - http://bayhas.com:8080/w140manu/1995%20S320%20S420%20S500%20Owner's%20Manual%20Edition%20C.pdf
|
#6
|
|||
|
|||
Just found my manual today in my trunk and found the diagram but thanks for the link, it will help in the future
Now i have anew problem I checked out the pulley's and it looks like the pulley for the Air Pump is tilted and i am not sure if this is fixable without replacing it . . . It looks like there is a main structure of the pulley then over that structure is a sleeve which the belt actually comes in contact with, that sleeve looks like it is tilted on the main structure but the main structure is intact . . . Any ideas? |
#7
|
|||
|
|||
It sounds like the air pump pulley bearing failed. Remove the air pump from the car and disassemble it to determine the exact problem.
__________________
Fred Hoelzle |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|