|
|
|
#1
|
|||
|
|||
95 MBZ C280 programming parameters
Have replaced c280 control module for srs and need to program the parameters. a 6 digit code. all codes clear and dont want to ruin the control module by improper code. Car has no side airbags. Have Baum CS2000 with latest software. This car has older SRS unit being replaced and it does not have parameter coding. Usually we find this number on the box shipped form the dealer however the supplier used by our customer is an importer.
Last edited by ROBERT HARRIS; 10-04-2001 at 07:16 PM. |
#2
|
|||
|
|||
ONLY the factory HHT, Star diagnosis lap top, OR the BAUM CS 2000 can program the SRS control unit. Also the AST 5700 Retriever will have this ability soon.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
: I have the Baum CS 2000 no reason to have the code if you dont have a way to put it in
|
#4
|
||||
|
||||
Robert give the post a few more days.. Someone should be able to help you with this..
Alon
__________________
'92 300CE - Sold 2004 C240 - 744 - C7 Wheels - Android Radio 2002 C320 - 816 - Sport Wagon |
#5
|
||||
|
||||
Bob, how do like the CS2000?
Considered buying one but too much $$$ for me. Bought an AST Pointer for myself and my tech has the Retriever.
How does your CS2000 play? |
#6
|
|||
|
|||
C280 SRS parameter code for programming new control mod
There were no helpful responces to our problem. However
after hours on the internet and calling every MBZ dealer and shop forman in the Greater Bay Area. We took a wild guess. The Answer?? The factory tool automatically enters the 'parameters' during its programming process of asking if the car has side bags, seat sensors, etc.. The aftermarket device (Baum CS2000)does not have the ability to do this and it requests a 6 digit code for the parameter. Alldata and MOD and Mitchell collision quote MBZ as that if the incorrect number is inserted that the SRS control module will become defective and require replacement. What then is the code?????? IT IS THE DEALERS SERVICE CODE NUMBER WITH A '0' IN FRONT OF IT. I.e. dealer code 05619 becomes 005619. Customer even pulled car out from under us and took to another MB tech. He ended up retracing all our steps and we found the answer . He used his Baum and now we are his best buds too. 3 Techs and hours spent. But success is sweet if not always profitable. Our thanks to the Service dept and techs at Smythe MBZ in San Jose for some insight. The answer to the problem was a Spock like 'best guess'! IT IS THE DEALERS SERVICE CODE NUMBER WITH A "0" ADDED TO IT |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1994 C280 Mercedes [I posted in wrong forum before sorry :( ] | JennyLovesMB | Off-Topic Discussion | 2 | 07-24-2003 05:15 PM |
P/S Filter on a 96 c280? | 96C280 | Tech Help | 1 | 02-10-2003 02:27 AM |
Ever lost respect for a fellow MBZ owner ? | PoloBenz | Off-Topic Discussion | 13 | 12-04-2002 07:34 PM |
AMG Aero 3-pc | sclassforever | Mercedes-Benz Wheels & Tires | 1 | 06-18-2001 11:34 AM |
MBZ care products | CaptAlex300e | Detailing and Interior | 0 | 01-07-2001 10:11 PM |