![]() |
|
|
|
#1
|
|||
|
|||
HVAC DTC Codes Help Needed
My HVAC system in my 99 C280 is in the Default mode: Air Circulation from the Defrost & Side vents only. This is with all HVAC Control settings.
So today I pulled the codes using HVAC display. Heres the errors found: DTC Codes Continuous Fault 24 1 42 1 Intermittent Fault 41 1 41 6 41 7 41 9 End These codes are not shown for AC/Heater codes.. ![]() Where do I find the definition for these Error Codes? Are they the same as the ODBII codes? Also, heres my HVAC Real Time Values: Real Time Values 01: 74F . | . 40: 03 02: 44F . | . 41: 03 03: 116 . | . 42: 03 05: 101 . | . 43: 6-C 06: 204 . | . 50: 114 07: 05 6. | . 51: 80F 08: 102 . | . 52: 32F 09: 50F . | . 54: OFF 10: 335 . | . 60: OPE 20: 00 . . | . 61: 0.9 21: 060 . | . 62: 0.9 22: 000 . | . 63: 0.9 23: 000 . | . 64: 0.9 24: 14.0 .| . 65: 0.9 . . . . . . .| . 66: 0.9 Thanks for any help.. Last edited by ScottyP; 01-18-2009 at 08:15 PM. |
Bookmarks |
|
|