|
|
|
|
|
#1
01-30-2009, 11:56 PM
|
|||
|
|||
|
W140 washer resevoir
My resevoir is leaking and I was thinking about replacing it myself. I see there is one on the fastlane parts site. When I went to look on how to get it out, I ran into some problems. I see that there are three screws holding it on, however, I can't see how you get to the one closest to the passenger door side. Pretty tight and a bunch of stuff in the way. Is there a special tool to get to that one?
Secondly, I see the pumps on the bottom and there is a bunch of stuff on the top. Any special stuff to watch out for if I give it another go? KG 
|
|
#2
02-02-2009, 08:11 AM
|
|||
|
|||
|
Removal of headlight or bumper is required.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
