|
|
|
#1
|
|||
|
|||
I need parts !!!!HELP!!!!!1
I have to change my motor , trans mounts and flex disk. I looking at $550.00 if I go with dealer. I want quallity parts definately but would rather save a few bucks. Im located in Georgia if anyone has any insight. If I have to order off internet I dont mind.
|
#2
|
||||
|
||||
go to top of page and click buy parts.
and it helps for which chassis and engine model |
#3
|
||||
|
||||
Depends whether you're a Georgia grad or a Georgia Tech grad.
Go Jackets!
__________________
Prost! |
#4
|
|||
|
|||
I have a 96 E320 3.2FI engine not sure how that translate into German. I was hoping to get referred to a certain brand known for their durability. I plan on handing car down so I would like to consider the long term. Im not a grad from either by the way.
|
#5
|
|||
|
|||
OE lasted 13 yrs; I'd suggest going that route again.
Click Fastlane link about.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#6
|
||||
|
||||
Good, UGA grads shouldn't attempt anything technical. You have the M104 in-line 6 cylinder.
You can do all of these jobs yourself if you have good instructions. I think the motor mounts may have tight access on that engine. Actually $550 is a fair price for outside work: sounds like about half for the parts and then 3 hours of labor. The parts I checked here are from German aftermarket suppliers (Corteco, Meyle) - I can't say who the actual OEM was.
__________________
Prost! |
#7
|
||||
|
||||
__________________
1988 California version 260E (W124) Anthracite Grey/Palomino Owned since new and still going strong and smooth MBCA member Past Mercedes-Benz: 1986 190E Baby Benz 1967 230 Inherited from mom when she downsized 1959 220S Introduced me to the joys of keepin' 'em goin' There are only 10 kinds of people in the world--those who understand binary and those who don't |
#8
|
|||
|
|||
$550.00 is parts only. I have already changed the mounts myself and went with OEM since I plan to hand down the vehicle. Im less concerned with flex disk and tranny mount since lion share is completed. There are some local retailers but they are no considerable difference from the dealer. I will look online again then make a decision. I was just wondering what afm brands were reputable.
|
#9
|
||||
|
||||
Meyle has been an aftermarket German supplier for at least 50 years.
__________________
Prost! |
#10
|
|||
|
|||
have fun doing the mounts and flex disks yourself, just let the dealer do it, motor mounts are no walk in the park and neither is the flex disks
__________________
99 Jetta Mk3 07 Jetta Mk5 89 300E W124 10 E 350 W212 08 C300 W204 Benz's aren't mine |
#11
|
|||
|
|||
But he's already done the motor mounts, which are more difficult than the flex disk.
|
#12
|
|||
|
|||
Update
Well I figured the rest would be a cinch as well.I got my part in but I am having the toughest time breaking the bolts on the flexdisk. I put an air rachet to it but its not enough torque. I cant get the impact hammer in with enough leverage to prevent slipping. Im callling it a night and starting fresh in the morning. Im hoping the penetrating oil will have time to sit overnight and loosen it a bit. Im always open for suggestions. I don't see how to hit the top 2 bolts either. I trust I have to slip car into neutral and rotate drive axle around until bolts are exposed. Good night guys and thanks thus far.
|
Bookmarks |
|
|