Quote:
Originally Posted by ps2cho
Thank you.
When I rebuilt the top end, I set the cam timing as it shows in the MB manual to perfection. Should I need to get a light to still check it?
|
The light is to check ignition timing, and yes you should do it. I realize that it is all set by computer, but there may be a problem in the ignition timing nonetheless. If you find that the timing is off, then you know what systems to start chasing. Things like crank position sensor, cam position sensor (if present), knock sensor, temp sensors, etc.
04-09-2009, 01:10 AM
Threaded Mode
