Sorry if this has been answered already but I couldn't find it. I bought a 190E at a yard sale. Yes, a yard sell for 200 bucks. Body is in excellent shape along with the interior. The guy said the Fuel pump relay was bad. Well, the relay is good. It was the pump that was bad. I installed the pump with the excitement of rollin in my MB but it won't start. If you spray a little fuel in the air intake it fires right up but quickly dies from stravation. I've replaced the fuel pump, fuel filter, spark plugs, wires, cap and button and i drained and flushed the gas tank. I have good fuel pressure coming in to the fuel distribution and out. I have fuel pressure at the cold start valve. But no fuel will come out of the four lines from the distribution. So I decided to break open the fuel distribution (cause there was a extra one in the truck) to maybe see what was going on inside. It was clean but the o-rings around the pump inside it were trash. I replaced them and clean everything really good. Put it back on and still no fuel will come. As i dug around under the seats I found 3 electromagnetic pressure actuators there. So It seems the guy was thinking the same as me, "it's not gettin fuel". But why? What am i missing here? Think it's a vaccum problem? Or does that system need to be primed? I thought I could talk to the local MB dealer, but well he was a real SOB and wouldn't tell me anything other than just bring it in. So please, if you have any suggestion let me hear them. Thanks in advace