|
|
|
|
|
|
|
#1
06-15-2009, 12:17 PM
|
|||
|
|||
|
300E brakes sqeeking?
I have a 1986 300E that the back pasanger side brakes squeek untill I put pressure on the brake peddle.The pads are in great shape, could it be something else? When I am driving down the road you here squeek squeek squeek squeek, put alittle pressure on the brake peddle and it stops. Any ideas?
|
|
#2
06-15-2009, 12:33 PM
|
||||
|
||||
|
Rust on the rotors, or worn pads. Take off the wheels and inspect them!
__________________
-diesel is not just a fuel, its a way of life-  '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|
|
#4
06-15-2009, 12:39 PM
|
||||
|
||||
|
Quote:
I agree, if there was no goop put behind the pads, then they may squeak.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|
|
#5
06-15-2009, 12:39 PM
|
||||
|
||||
|
When the pads where replaced did you put shims or brake goop on the pads?
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#6
06-15-2009, 12:44 PM
|
|||
|
|||
|
Quote:
|
|
#8
06-15-2009, 01:06 PM
|
|||
|
|||
|
Quote:
|
|
#9
06-15-2009, 01:15 PM
|
||||
|
||||
|
Quote:
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#10
06-15-2009, 04:21 PM
|
||||
|
||||
|
On my W220 I remove the cap and cover the brake reservoir and compress the pistons with a large flat head screwdriver.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#11
06-15-2009, 04:24 PM
|
||||
|
||||
|
This is in the DIY Wiki on the forum
http://www.peachparts.com/Wikka/W124BrakePads Once you do it you probably go WTF have I been...... 
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#12
06-16-2009, 09:44 AM
|
|||
|
|||
|
No need to goop the back of the pads..
I'd use Textar pads and you are suppose to clean the travel area where the pad rests. Use a small brass parts cleaning brush. Then, apply a small amount of MB brake grease to the metal part of the pad(side contact point). If the piston moves freely, then you are good to go. While I use MB grease as I have it- it looks to me like an anti-seizing compound. M
|
|
#13
06-16-2009, 11:43 AM
|
||||
|
||||
|
I've never used the anti-squeak either, I just glob some anti-seize on the back of the pads....have never had much squeaking issues so far.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|
 |
| Bookmarks |
|
|
Hybrid Mode
