|
|
|
#1
|
|||
|
|||
Help! fix seat switch knob E420
Has anyone broken AND repaired the seat switch on the driver's side door. Some time ago, I gently (I thought) pried off the lower (seat bottom) knob on the switch and broke the square plastic protrusion that the knob snaps onto. That piece of plastic looks replaceable but not easily and so, I doubt that the piece is available. But over $100 for a new switch!!! And it works fine. Anybody been down this road?
__________________
Bob Johnston 03 E55 Comand/Nav/Bluetooth/Ipod added Black/black (Oh man, this car is sooooo fast.) |
#2
|
||||
|
||||
Do you still have the broken off square protrusion (maybe still in the back of the seat lever)? If so, you may be able to use a TINY amount of superglue such as 'plastic surgery' brand and re-attach the button without messing up the switch.
If you don't have the square section, I have repaired other plastic switches by inserting a small and short metal screw (a little bigger than eyeglass screws) into the broken off area, without going too deep and shorting out the switch. This leaves a peg like protrusion that a dab of 2 part epoxy on the back of the switch can grip. Takes patience and a steady hand. Good luck.
__________________
John 2003 Firemist Red/grey leather SL 500 2015 Palladium Silver/black mbtex GLK 350 1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD) Click to see 87 300E |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
renewing switch for electric seat adjustment front | stevelewis | Diesel Discussion | 3 | 12-07-2004 12:01 PM |
81' 300 SD Seat Switch | Elliott Fager | Diesel Discussion | 3 | 07-07-2003 04:31 PM |
E420 Seat rattle / click | EMB145Driver | Tech Help | 2 | 07-03-2003 09:33 PM |
1981 300D Power window switch only goes down. Can I fix it? or Where to get new? | Erikir | Diesel Discussion | 3 | 04-13-2003 05:29 PM |
Ouch$#@@How do I fix a wire barb coming out of my seat frame?(85 300D) | Carrameow | Tech Help | 2 | 08-11-2002 09:57 AM |