|
|
|
|
|
#1
08-23-2009, 03:50 PM
|
||||
|
||||
|
W126 Guide-rod-mount replacement?
When installing new wheel bearings today...I realized the passenger-side guide rod "mount/bushing" was moving back and forth a bit causing a "clunking" sound...Can the guide rod "mount/bushing" be replaced with out removing the complete mount/housing/assembly?? Id like to replace just the guide rod "mount/bushing" alone if possible.
 91 300SE (W126) View Public ProfileFind all posts by eatlead 
|
|
#2
08-24-2009, 09:01 AM
|
|||
|
|||
|
You need to remove the housing assembly & then remove the thrust bushing.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
| Bookmarks |
|
|
Linear Mode
