Vacuum lines unconnected

[TnBob]

While working at getting my '85 300D back on the road I found at least 3 vacuum lines that are not connected.

Any suggestions as to where they should go ?
It seems the black with red stripe should go into the open T but Im not certain.

One reason I was poking around is the motor doesnt shut off without the use of the under the hood stop switch.

The vacuum line to the 90 degree fitting on the vacuum switch is there, so from what Ive read that would indicate an ignition switch vacuum issue.

Ive done a vacuum check with a MityVac from the doors back and all works well there, doors, trunk and fuel door.

Thanks for any suggestions.