Generally, with combined city and highway driving, how many miles should one get on front rotors. Car is a 98 E300D. I am hitting 57K on original rotors and have about 2mm ridge on edge. I know there is a specific measurment, but am I in the range of a new set or can I get up to 80K before the change?
Thank you... rsl007

__________________
RSL007
1999 ML430
2001 C320 Sport
2000 SAAB 9-5
1998 E300DT
1998 C280sport
1991 300D
1991 350SDL
1982 300DT
1972 Porsche 911 Targa

Greetings RSL,

The minimum thickness of your rotors are stamped into the edge of each rotor. Just off the top of my head I want to say 7.3 is the minimum. Are the pads still the originals? If they are, what is their thickness now?


Charles

__________________
"Tell me and I will listen, Teach me and I will learn, Show me and I will accomplish, Involve me and I will succeed."
'84 300SD 256,000 Gold on Brown (Mileage Award)
'86 300E 246,000 Blue on Tan

I replaced second set of front pads at 57,000 miles. Still original rotors. I am going to put new front rotors in. Should have done it when I had the pads off...
rsl007

Rotors are cheap. For my SEC, they were $51.00 each for ATE Power Disks at the Mercedes Shop. Much less than the dealer. Replace them, don`t even think about turning them. Call the Mercedes Shop.

John

I too need new front rotors, what are the difference in the 3 brands mercedesshop has?
ATE
ATE power disk
Balo

Thanks
nick

I just got new ATE front rotors and pads for my car form partsshop. $120 plus the stop squeak, sensors, and shipping, came out to around $150.00

Installation = my job. hehe

Alon

__________________
'92 300CE - Sold
2004 C240 - 744 - C7 Wheels - Android Radio
2002 C320 - 816 - Sport Wagon

Greetings Nick,

I'd check the brand of caliper that MB installed on my car first and match like brands if possible. I installed Balo discs on my wifes 300E and they looked great coming out of the box and have performed well since installation about a month ago. If you want to know if the hardness is different between brands, I can't tell you that info, probably no one else can either unless they're into metalurgy. I do know that the small cross hatched design in my rear disc are still there after almost a thousand miles on them and the Teves pads seem to perform great as compared to the grooved rotors they replaced and the bare minimum pads that still remained. Balo does make a great disc from a users point of view.


Charles

__________________
"Tell me and I will listen, Teach me and I will learn, Show me and I will accomplish, Involve me and I will succeed."
'84 300SD 256,000 Gold on Brown (Mileage Award)
'86 300E 246,000 Blue on Tan

i also do both city and highway driving. around 50,000 miles, i noticed pulsinating (slight shaking) when i broke. changed the front rotors to cross drilled and the shaking went away.

__________________
1997 E420