190 front window motor
So, I'm trying to replace the motor in my regulator and the regulator just happens to be in the way. Great. Can anyone tell me how to get the last screw out without breaking some aluminum? It's the big phillips head screw in the pic below.
While I'm at it, what kind of grease is used on these? Is regular wheel bearing grease fine? window motor Thanks Darryl |
Most of these are non-serviceable and once assembled, the unit must be replaced.
|
1 Attachment(s)
Well, seeing as how you can only buy the motor, I attacked the regulator with a drill. I drilled a hole right over the one screw that was inaccessible - thank you MB. Took the old motor out, popped the new one in again and now I can pay tolls again!
Darryl |
All times are GMT -4. The time now is 04:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website