|
|
|
#1
|
|||
|
|||
190 front window motor
So, I'm trying to replace the motor in my regulator and the regulator just happens to be in the way. Great. Can anyone tell me how to get the last screw out without breaking some aluminum? It's the big phillips head screw in the pic below.
While I'm at it, what kind of grease is used on these? Is regular wheel bearing grease fine? window motor Thanks Darryl
__________________
'91 190E Last edited by 16vwannabe; 12-01-2001 at 05:34 PM. |
#2
|
|||
|
|||
Most of these are non-serviceable and once assembled, the unit must be replaced.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#3
|
|||
|
|||
Well, seeing as how you can only buy the motor, I attacked the regulator with a drill. I drilled a hole right over the one screw that was inaccessible - thank you MB. Took the old motor out, popped the new one in again and now I can pay tolls again!
Darryl
__________________
'91 190E |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Drivers Window problems | DavidF.C280 | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 1 | 09-16-2004 02:48 PM |
window stopped working, motor is fine | adiel | Diesel Discussion | 10 | 03-10-2004 07:58 PM |
Replaced the RF window motor | Richard Eldridge | Diesel Discussion | 1 | 11-28-2003 07:41 PM |
power window motor probs with 109 | kaiser | Tech Help | 3 | 10-28-2003 12:36 PM |
116 Window Motor Swap..... | 300SDog | Vintage Mercedes Forum | 6 | 08-17-2003 07:05 PM |