![]() |
|
|
|
#1
|
||||
|
||||
98' W210 E320 V6 ENGINE fit a W124 300E 4 Speed Auto Trans?
As title says will the E320 V6 engine couple up to the W124 M103 4 Speed auto? There is 1 over here @ moment with low k's I'm interested in as I am looking @ rebuilding the M103 if needs be. I am pretty much committed to rebuilding the W124 trans that's all
![]() Or even will the V6 engine with matching V6 transmission couple up to the W124 tail shaft? Is it a viable swap? Your help very much appreciated ![]() P.S. Feel stupid asking this as I know even the 300SE engine has different mounts & trans lines. Although you just swap these over. I would really like to score a 24V engine if I could. It's just there is this V6 engine & also a trans to suit from another seller down here. Engine has only 80k's (50k miles) on it. Sorry if this seems a pathetic Q guys!
__________________
um.....why have men got nipples ![]() Last edited by BAD300; 04-15-2010 at 08:02 PM. |
#2
|
|||
|
|||
The M112 engine will NOT bolt up to the M102/103/104 bellhousing.
To use a M112 engine OR trans in any earlier car...you would need computers to operate the fuel system AND/OR the trans system.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
Quote:
Thanks again
__________________
um.....why have men got nipples ![]() |
![]() |
Bookmarks |
|
|