|
|
|
|
|
#1
04-24-2010, 12:38 PM
|
|||
|
|||
|
Diagnostic connector
Hi every body,
I have code scanner for new protocols on Eclass (and new connector), Is there any way to connect an old Diag connector on 320CDI from 2002, picture1, to a new one, picture2, on 420CDI from 2008 thanks
__________________
Keep us posted especially if your problem is solved Present cars: My car: E-class 420CDI, 2008, W211, V8, 180 000km Wife's one: C-class 220CDI Sport Coupé, Euro, 2002, W203. 345 000km Son's one: GLK class, 220CDI, 2009, W204 Sold: E-class 260E, 1988, W124, Wonderfull car sold after 489 000 kilometres of reliable services (engine M103, clutch, brake system and 5 speed manual gear box all original). Sold: E-class, 320CDI, W210, 2000, 225 000km 
|
|
#2
04-26-2010, 08:19 AM
|
|||
|
|||
|
The 38 pin connector has different protocols that the ODB2 connector (2nd picture).
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
