Guys,

Finished another project today, I changed my engine and transmission mounts...what a fun job that was

Here is my question. I removed the transmission support bracket to access and remove the transmission mount after changing the main engine mounts....

I noticed on the bracket that the over sized holes were not centered correctly originally (on purpose i guess)...i tried to center the bolts and bracket, but then the transmission mount would not sit correctly...so i changed the mount and bolted everything back together as it was before the job....

is there a special procedure to align the drive train correctly? or is that the way it should be?

thanks

__________________
1993 300E, 2.8 M104 .....