|
|
|
|
|
|
|
#1
06-13-2010, 07:27 PM
|
|||
|
|||
|
i need help starting a 85 sec
i have a 1985 500 sec that has not ran in 5 years. i tokk parts from a running donner car the fuel pump,filter,fuel distributor. fuel injectors. i have spark and i have fuel and pressure to the fuel lines but the injectors won't spray. is it because there is not enough fuel pressure ? what can i do next ?
|
|
#2
06-13-2010, 10:28 PM
|
||||
|
||||
|
You have working "fuel pump,filter,fuel distributor." Have you confirmed your lines are clear ?
Sitting that long alot of goodies very easily could have collected in the lines. I popped and cleaned the hard fuel lines on a good running car and filled them with brake fluid letting it sit for ~1/2 hr and blew it out. Amazing the amount of junk that came out. You should have a real mist spray at the injector while cranking if you just pop the fitting slightly. The other thing... if you have a check valve in the return line that is bad... ie releasing with minimal pressure.. the car will almost never start... but if it does it will run fine. A junk yard check valve is usually under a buck. On older Volvo's that check valve is back by the tank actually to the rear of the final fuel pump.
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
|
 |
| Bookmarks |
|
|
Hybrid Mode
