|
|
|
#1
|
|||
|
|||
How to find bad lifter?
Hi,
I have the valve cover off and am staring at the cams and lifters. I would rather not replace all lifters. Do I just remove the torx bolts that hold the cams down and remove the cams then press down on the lifters to see which one is bad? Or do I have to actually run the engine first to find out what lifter is not lifting? Also, is there any diy doc about removing the rocker arms on this engine? I have the Technibooks "Mercedes W124 1985-1995" Owners Workshop manual and it has nothing about removing the cams/rocker arms. Thanks very much, Jim Lee |
#2
|
|||
|
|||
#3
|
||||
|
||||
I would do them all once you have them exposed.
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy" Current Monika '74 450 SL BrownHilda '79 280SL FoxyCleopatra '99 Chevy Suburban Scarlett 2014 Jeep Cherokee Krystal 2004 Volvo S60 Gone '74 Jeep CJ5 '97 Jeep ZJ Laredo Rudolf ‘86 300SDL Bruno '81 300SD Fritzi '84 BMW '92 Subaru '96 Impala SS '71 Buick GS conv '67 GTO conv '63 Corvair conv '57 Nomad |
Bookmarks |
|
|