|
Overflow hose on M104
Might be a stupid question, but does anyone know what the name of the hose that goes from the top nipple of the coolant reservoir (near the cap) to the overflow tank located in the passenger wheelwell? I assumed it was called an overflow hose.
I have a friend at a parts store who can't seem to find the part. On my car, (1995 E320), the hose I am speaking of is braided. Is it necessary to replace this hose with the same type, or can I get away with any old radiator hose as long as it fits? Thanks |
Over Flow Hose
1 Attachment(s)
# 021 997 76 82
This one does not have the braided cloth covering. The only real Abrasion Stress Point is where the hose passes through the Engine Compartment Metal Sidewall @ just right behind the Passenger Hood Hinge. I'd put a Rubber grommet in the opening ,if you're concerned,and run the hose through the grommet. Normal Retail (That's Not a Stealership) appears to be about $5.50 per meter. Any coolant rated hose with the correct I.D and O.D. will suffice. You do realize the Over Flow Hose routes to the Over Flow Tank located inside the Passenger side Fender-well?(Accessible by removing the "Plastico" inner fender liner.) |
Quote:
Is that a part number you listed on the top of your post (#021 997 76 82)? Thank you for the input! |
Yes
That's the part number. (From the,Verboten, A*t*ha*s [McCain's home state] )
I'd get a FREE subscription the the EPC and double check MY specific parts #. http://epc.startekinfo.com/epc/subscribe.jsp |
| All times are GMT -4. The time now is 02:29 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website