|
|
|
|
|
#1
10-05-2010, 12:54 PM
|
|||
|
|||
no juice to injector
I have a 97 c280 cylinder #2 is not firing I checked the wire to the injector there is current when you start the car,after about 5-10 sec no juice! anybody have a idea what it could be? also a have a cel on
Last edited by fazer; 10-06-2010 at 04:04 AM. 
|
|
#2
10-05-2010, 01:13 PM
|
|||
|
|||
|
You have a misfire on #2 cylinder and after the ecu recognizes it, it cuts the fuel to that cyl. I would look at the ignition system before suspecting a fuel problem.
__________________
 90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff
|
 |
| Bookmarks |
|
|
Linear Mode
