W126 Gen II Headlight Switch
What next! Headlight switch will not turn to full on. Just parking lights and fog. If I push hard, they may come on when I hold it but running it out.
At least I found a better way to remove it. Hence the thread. The two threads I read said to pull the knob and remove the nut. Which is fine. But if you have knee impact things you can not just pull it out form behind as suggested. I found that removing the cluster made it a breeze to pull out.
Note: The wiring looks fixed to it. But it basically pulls apart in halves. No need to pry on a connector, etc.
Now I need to see if I can take it apart and fix what I assume is a spring and small ball bering gone off.
__________________
1991 560 SEL / 185k miles
1992 750il / 17k miles - project car
|