I think I have a short in the driver's door wiring on my 300CE. When I open the driver's door and start the car the driver's seat will adjust itself to a position not stored in memory. How do I go about tracing the wiring in the door? Does the entire door panel need to be removed to gain access? Is it possible to disable the memory feature temporarily? I recall there being a memory module somewhere in the cabin.

__________________
1989 300CE

What year car?

All of the 300CE's have a seat computer under both front seats!

Most likely you will need to remove the door panel.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

It is a 1989 300CE. Have you ever seen this type of behaviour before?

__________________
1989 300CE