|
|
|
#1
|
|||
|
|||
possible b2 piston problem? HELP!!
I could really use some help before I spend a small fortune on a new tranny.
I posted this before but got no response. My 1982 300d turbo is slipping only in first gear, catches, then shifts with no problem thru the rest of the gears. I had a new filter, fluid & modulator done about 1000mi ago, then this problem started, my MB mechanic has decided to close up shop after 40yrs, so I can't take it back for a look see. Does this sound like it could be the b2 piston? Any help would be greatly appreciated before I go the new tranny route. |
#2
|
|||
|
|||
This article may be of interest. Check it out.
http://hsb.baylor.edu/html/easley/autofaqs/atcheck.htm |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
B2 Piston W124 | lino | Tech Help | 45 | 02-21-2014 04:17 PM |
603 - Piston wrist pin problem? | goldenbear | Diesel Discussion | 6 | 09-10-2004 09:20 AM |
Brake caliper question - 190D | cornblatt | Diesel Discussion | 3 | 10-19-2003 03:57 PM |
intermittent brake problem | fz500sel | Tech Help | 2 | 10-07-2003 01:44 AM |
Igniton switch or Relay Problem | cmusante | Tech Help | 1 | 10-07-2002 06:00 PM |