Thanks for the replies ...I know the unit is the EZL that is what I started thread with but thanks for trying to get me some relief.......I have it apart without destroying it....The only EZLs I found for 150 bucks are the M103 4 pins/per connector type...this unit has 8 pins per connector......no epoxy inside just a clear soft gel that can be removed.....I work on small electronic devices for a living (camcorders, 2 way commercial handheld radios,broadcast television equip and such) and this module is not too bad to get into ....Im just trying to identify a heat sink mounted smd chip that is a mystery...looks like a miniature strain gauge .....2 leads going back to main board....it is obviously overheated and cracked....The other modules have the same type component but all the modules at the salvage yard are gone......trying to find similar modules even if they are scrap.....so I can get donor components.....I always enjoiy trying to repair the impossible.....

__________________
1978 Yellow 300D (The Mustard Toad)
1980 Blue 240D (The Iron Toad)
1989 Grey Mitsu.4WD Mighty Max Pickup (Needs a Diesel transplant bad)

(Open the pod bay doors HAL)