|
|
|
#1
|
|||
|
|||
w210 Highbeam problem
I just bought a 03 E320 with a highbeam problem
The highbeams come on if I pull the universal switch towards me but When I pust it to the rear position They do not come on. The switch snaps into position but no light and the lamp on the instrument panel don't come on either Is this a Universal switch problem or should I be looking elsewhere? if so where ? Thanks in advance BOB |
#2
|
|||
|
|||
Could be the switch, but diagnosis with MB scanner would be less than a guess.
There are 4 computers involved in turning on those lights!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|