|
|
|
|
|
#1
03-02-2011, 01:18 PM
|
|||
|
|||
|
'90 300E alarm disconnect
I've searched other posts,but still have a problem with disabling the alarm. Under the passenger side floormat,there is a black box,about 1"x 12". I can't figure how it's supposed to open. How to get the lid off. Is there a hinge side? Once inside,what does the disconnect plug look like?? Thanks for any help with this!
__________________
2001 E320 4matic, 2003 E320 4matic wagon 
|
|
#2
03-02-2011, 07:43 PM
|
||||
|
||||
|
Under the floor carpet and plastic cover in the front of the footwell, a box marked BECKER simply unplugs.
__________________
 Gone to the dark side - Jeff
|
|
#4
03-02-2011, 10:12 PM
|
||||
|
||||
|
Will not affect the radio.
__________________
Gone to the dark side - Jeff
|
|
#6
03-03-2011, 10:46 AM
|
||||
|
||||
|
Do be careful with the radio if it is original, disconnecting the radio when the alarm is tripped will disable it.
__________________
Gone to the dark side - Jeff
|
|
#8
03-03-2011, 02:26 PM
|
||||
|
||||
|
I would do it with the battery disconnected, but as far as I remember, it will not affect the radio unless it is in alarm at the time of disconnect.
If/when you remove the radio you will notice an orange sticker on the back warning you to disconnect the wires in the correct order to avoid damage to the radio.
__________________
Gone to the dark side - Jeff
|
|
#10
03-04-2011, 05:16 AM
|
|||
|
|||
|
Quote:
__________________
http://i193.photobucket.com/albums/z...-RESIZED-1.jpg 1991 300E - 212K and rising fast...
|
|
#12
03-04-2011, 05:34 PM
|
||||
|
||||
|
I'm grumpy, just not very good at it.
Glad it worked out okay.
__________________
Gone to the dark side - Jeff
|
 |
| Bookmarks |
|
|
Linear Mode
