C220 will not start

[blueboxgeek09]

Hello,

I have a problem with my wife's 96 C220. I replaced the motor mounts on the car, and now the car cranks over but there is no spark at the cylinders.

Before I even touched the mounts It was starting and running fine except for the vibration at idle.

I have read that it could be the crank position sensor or the OVP. I removed the overload protection relay and jumped positions 1 and 2 and heard fuel move into the engine then the car started then stopped...im thinking OVP...

Could it just be a freak occurance?...the relay cover did come off in my hand when i removed it..and the solder connections do look a little iffy.

I checked all the connections underneath and everything seems to be in order..

The car has 151,000 miles on it now...any advice is appreciated...

Much Thanks


-Rashad