|
|
|
|
|
#1
03-02-2011, 09:50 AM
|
||||
|
||||
|
What is Water Pump Bolt Thread Pitch for 95/96 E320?
In the event I round mine when I replace my pump, I have found M8x30 bolts with both hex and allen heads and thread pitch of 1.25. (M-1.25-8x30)
Is that correct for the pump/block? Dealer can order bolts @ $5.31 each, but if I can get them for 50 cents I would prefer to do that.
__________________
2008 E350 4matic / Black/Anthracite ------------------------------------ Gone but not Forgotten: 2001 E430 4matic, 206,xxx miles, Black/Charcoal 1995 E320, 252,xxx miles, Black/Grey 1989 260E, 223,00 miles, Black/Black 
|
|
#2
03-14-2011, 12:39 PM
|
||||
|
||||
|
To answer this question for anyone interested, it is a standard 8.30 1.25 pitch.
__________________
2008 E350 4matic / Black/Anthracite ------------------------------------ Gone but not Forgotten: 2001 E430 4matic, 206,xxx miles, Black/Charcoal 1995 E320, 252,xxx miles, Black/Grey 1989 260E, 223,00 miles, Black/Black
|
|
#3
03-14-2011, 07:57 PM
|
|||
|
|||
|
From my experience with German cars almost all 13mm head bolts are M8x1.25.
__________________
http://i193.photobucket.com/albums/z...-RESIZED-1.jpg 1991 300E - 212K and rising fast...
|
 |
| Bookmarks |
|
|
Linear Mode
