![]() |
|
|
|
#1
|
|||
|
|||
MB 300 CE Problems to start!!!!
I was driving my MB 300 CE 1992, and suddenly turned off by itself, all the system. 2 0r 3 seconds later the dashboard lights automatically turned on. I tried start my carr again but nothing. only cranks and cranks.
I checked the fuse box located on the dirvers fender, (I dont know if there are some more important fuses to check). all them ok. Then I checked the coil witn a tester, it receives power but apparently dont send enough power to the distributor. I changed distributor cab, rotor and tried with a similar coil... the problem is still there. I already replaced the crankshaft sensor, camshaft sensor, but the distributor not receive spark from coil.... I tied with a used CIM too, but my car not start, I dont believe the 2nd CIM is damage too, but could happen. ok.. I did all possible by myself. Something else I can try???? If this can help, 1 month ago my cylinder key was stuck. I replaced all the ignition lock system for a used one. the diference is that the conector has 7 pins and the original has 8 pins. but the car was working for around 15 days... Last edited by mbdoc; 03-21-2011 at 08:13 AM. |
Bookmarks |
|
|