|
|
|
#1
|
|||
|
|||
starting problems 1990 300e
90 percent of time no problem, but sometimes when i turn the key u hear the starter start to engage but will not spin motor. shiftng around the gear shift from park to d back to park or nutral. then i can get a start. we bypassed the nutral safety switch today and i changed the starter, and still have the same problem. i sure would like info on these models 1990 300e. is there a relay in the starting system or anything else. any ideas??? i m wondering if i have a bad spot on the flywheel ring teeth.
|
#2
|
||||
|
||||
If you can get it to fail, see if you have the start signal to the solenoid on the starter itself, that would be the Y in the road on the problem.
You could make up a test light so you can see the light come on from inside the car, would be the easiest way to do it but a little tougher to rig it up.
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#3
|
||||
|
||||
What were the teeth on the starter gear like when you took it off? Worn?
I'd suspect a bad flywheel gear in that case. If you bought a rebuilt, it could be bad, too. I rebuilt starters and alternators at one point in my career. I know they dont do more than basic testing. Gotta keep the productivity up, up, UP!!!
__________________
My first Mercedes Benz. 4/6/07. 1984 190E (201 024) 2.3L four. |
Bookmarks |
|
|