|
|
|
|
|
#1
07-31-2012, 09:27 AM
|
|||
|
|||
|
1997 SL500 Convertible Top Operation
Hello everyone! I have a 1997 SL500 that has a roll bar thats stuck and will not move. Also since thats not operating the top will not operate. I believe one of the switches may have an issue but I don't know which one. Theses are the codes that I got out of the soft top computer.
1) 178 Warning buzzer (e15h1) 2) 97 Power window faulty power window motor left front hall sensor (m10/3) 3) 114 Limit switches (S84/4) Soft top close 4) 124 RB faulty limit switch signal illogical 5) 122 limit switch (a83/1) roll bar stowed 6) 96 Power window faulty power window motor right front hall sensor Any help would be greatly appreciated!!
__________________
DRIVE HARD-DRIVE FAST-DRIVE TO GET THE HELL OUT OF MY WAY. 1986 190E 2.3-16 Pearl Black!! 1987 190E 2.3-16 Smoke Silver!! 1986 190E 2.5-16 Pearl Black!! 2004 CLK 500 Cabrio Designo package!! 1994 E320 Cabrio Red with black top!! 1985 500 SEL Anthracite Grey !! 2011 Subaru Impreza STI 380HP (Yeah Baby) 
|
|
#2
07-31-2012, 12:48 PM
|
|||
|
|||
|
Sync the windows & move top to opposite position.
Does the pump run when operating the roll-bar switch?
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
