|
|
|
|
|
#3
01-26-2012, 05:14 PM
|
|||
|
|||
|
Vacuum pump
Rebuilding the one you have is probably a lot cheaper than replacing it. Its also a pretty easy process.
__________________
DRIVE HARD-DRIVE FAST-DRIVE TO GET THE HELL OUT OF MY WAY. 1986 190E 2.3-16 Pearl Black!! 1987 190E 2.3-16 Smoke Silver!! 1986 190E 2.5-16 Pearl Black!! 2004 CLK 500 Cabrio Designo package!! 1994 E320 Cabrio Red with black top!! 1985 500 SEL Anthracite Grey !! 2011 Subaru Impreza STI 380HP (Yeah Baby) 
|
|
#4
01-26-2012, 10:29 PM
|
||||
|
||||
|
601/2/3 pumps aren't rebuildable like the 616/7 pumps.
Pierburg is a good brand. If you get a pump from the dealer, chances are it'll have Pierburg markings. Don't assume that to mean it's the same pump! The Behr radiator you get from an MB dealer can be different from the Behr radiator you buy somewhere else. I understand Phil/FastLane sells Febi brand pumps made in Italy. There are [Chinese?] pumps on eBay for half of what a Pierburg pump costs. I don't know how good they are in the long haul. What other brands have you seen? Sixto 87 300D
|
|
#5
01-26-2012, 10:52 PM
|
||||
|
||||
|
OP,
Next time post all your questions in the diesel section about your wagon.. it gets more traffic and barely any diesel heads come to this section  But a good quality pump is well worth the piece of mind! Find your way to GSXR's webpage and look at the pic's of a pump that came apart on a om603... not pretty. PS: new management will not allow us to give you a link  sixto will give you very good info on all topics diesel related!
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D
|
 |
| Bookmarks |
|
|
Linear Mode
