Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-23-2011, 06:08 PM
Registered User
 
Join Date: Apr 2004
Location: Atlanta, Georgia, USA
Posts: 61
300E Antilock Light

I just replaced the four brake hoses and flushed the brake fluid in my 1986 300E. It was quite a job to get all of the air out, but the Motive preesure bleeder made it quite a bit easier.

Prior to this, the "Antilock" light would occasionally come on after driving a bit, primarily in the morning. While I had the wheels off, I removed both front ABS wheel sensors, cleaned both and cleaned the internal gear teeth with brake cleaner. Both had a fair amount of metal filings attached. Both had about 250 ac mv output. I did not remove the sensor on the differential. Later, while beginning the test drive, the light came on again. I shut the car down, restarted and drove for quite awhile and the light did not reappear.

Any thoughts on what may cause this intermittent problem?

Brent Smith
1986 300E 273,000 miles
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page